Description
Flux Core Wire : Sorex E71T-1C
Gas-Shielded Flux Cored Wire for Mild Steel (E71T-1C)
Executing high-speed structural carbon steel fabrication across building frameworks, heavy machinery, ship hulls, and storage tanks demands filler metal that delivers continuous high deposition without compromising mechanical integrity. The Gas-Shielded Flux Cored Wire for Mild Steel (E71T-1C) series from Thermatech offers exceptional operational reliability powered by Wire Sorex E71T-1C manufacturing precision.
Classified under AWS A5.20 E71T-1C, Gas-Shielded Flux Cored Wire for Mild Steel (E71T-1C) utilizes a fast-freezing titania slag system that supports stable, all-position welding without puddle sagging or edge undercut. Optimized for use with 100% CO2 shielding gas, this Wire Sorex E71T-1C consumable produces low-hydrogen weld deposits with minimal spatter loss and self-peeling slag. The resulting smooth, aesthetically clean weld beads consistently satisfy stringent non-destructive radiographic (NDT) inspection criteria.
Technical Advantages of Gas-Shielded Flux Cored Wire for Mild Steel (E71T-1C)
Built to maximize throughput and welder efficiency in demanding fabrication shop environments, this product line offers key advantages:
- Superior All-Position Arc Stability: Fast-freezing slag enables effortless vertical-up, vertical-down, and overhead welding with precise puddle control.
- High Travel Speeds & Deposition Efficiency: Wire Sorex E71T-1C flux-cored technology delivers significantly higher deposition rates than standard solid wires, lowering total labor costs per meter of weld.
- Radiographic Quality Deposit: Moisture-resistant formulation ensures low diffusible hydrogen levels, preventing porosity, gas pockets, and cold cracking in thick carbon steel plates.
- Self-Detaching Slag Layer: Slag peels away effortlessly upon cooling, minimizing post-weld grinding and joint preparation time between multi-pass runs.
DESCRIPTION :
- SFC-71 is an all-position rutile flux cored wire designed to be used with CO2 or Ar/CO2 gas mixture.
- It can be used on all-position welds with both single and multiple pass welds for mild steel and low alloy steels.
APPLICATIONS :
- It is widely used for shipbuilding, storage vessels, structural fabrication, machinery and piping,etc.
NOTE ON USAGE :
- Use DC (+) polarity.
- Maintain a higher welding speed in order to get enough penetration in the down hand welding position.
TYPICAL CHEMICAL COMPOSITION OF WELD METAL (wt%) : (Shielding Gas: 100% CO2)
Weld Metal Analysis :
Phosphorus (P) 0.012Sulphur (S) 0.009
| Carbon (C) | 0.051 | |
| Manganese (Mn) | 1.36 | |
| Silicon (Si) | 0.48 | |
| Phosphorus (P) | 0.012 | |
| Sulphur (S) | 0.009 |
TYPICAL MECHANICAL PROPERTIES OF WELD METAL: (Shielding Gas: 100% CO2)
| YP N/mm2 | 474 | |
| TS N/mm2 | 573 | |
| EL% | 28 |
TYPICAL IMPACT VALUES :
- IV -20°C J
APPROVALS :
- ABS, BV, CCS,CE,CR, DNV, GL, LR, NK
SUGGESTED WELDING PARAMETERS (DC <+>)
Contact Us & Inquiries:
- 🌏 Website: https://thermal-mech.com
- 📩 FB Inbox: m.me/thermalmech
- ✅ LINE OA: @thermalmechanics
- 📧 Email: sales@thermal-mech.com
- ☎️ Tel: 02-759-4795
FAQ: Frequently Asked Questions About Gas-Shielded Flux Cored Wire for Mild Steel (E71T-1C)
Q: What makes Gas-Shielded Flux Cored Wire for Mild Steel (E71T-1C) ideal for general structural steel fabrication?
A: Gas-Shielded Flux Cored Wire for Mild Steel (E71T-1C) features an all-position titania slag system that allows welders to switch between flat, vertical, and overhead welds smoothly. It offers higher deposition rates and deeper penetration than standard solid MIG wire while maintaining low spatter levels.
Q: What shielding gas is recommended for this Wire Sorex E71T-1C product?
A: This Wire Sorex E71T-1C consumable is specifically formulated for use with 100% CO₂ shielding gas, offering optimal arc stability, deep joint penetration, and economical operation for heavy structural steelwork.
- Description
-
Flux Core Wire : Sorex E71T-1C
Gas-Shielded Flux Cored Wire for Mild Steel (E71T-1C)
Executing high-speed structural carbon steel fabrication across building frameworks, heavy machinery, ship hulls, and storage tanks demands filler metal that delivers continuous high deposition without compromising mechanical integrity. The Gas-Shielded Flux Cored Wire for Mild Steel (E71T-1C) series from Thermatech offers exceptional operational reliability powered by Wire Sorex E71T-1C manufacturing precision.
Classified under AWS A5.20 E71T-1C, Gas-Shielded Flux Cored Wire for Mild Steel (E71T-1C) utilizes a fast-freezing titania slag system that supports stable, all-position welding without puddle sagging or edge undercut. Optimized for use with 100% CO2 shielding gas, this Wire Sorex E71T-1C consumable produces low-hydrogen weld deposits with minimal spatter loss and self-peeling slag. The resulting smooth, aesthetically clean weld beads consistently satisfy stringent non-destructive radiographic (NDT) inspection criteria.
Technical Advantages of Gas-Shielded Flux Cored Wire for Mild Steel (E71T-1C)
Built to maximize throughput and welder efficiency in demanding fabrication shop environments, this product line offers key advantages:
- Superior All-Position Arc Stability: Fast-freezing slag enables effortless vertical-up, vertical-down, and overhead welding with precise puddle control.
- High Travel Speeds & Deposition Efficiency: Wire Sorex E71T-1C flux-cored technology delivers significantly higher deposition rates than standard solid wires, lowering total labor costs per meter of weld.
- Radiographic Quality Deposit: Moisture-resistant formulation ensures low diffusible hydrogen levels, preventing porosity, gas pockets, and cold cracking in thick carbon steel plates.
- Self-Detaching Slag Layer: Slag peels away effortlessly upon cooling, minimizing post-weld grinding and joint preparation time between multi-pass runs.
DESCRIPTION :
- SFC-71 is an all-position rutile flux cored wire designed to be used with CO2 or Ar/CO2 gas mixture.
- It can be used on all-position welds with both single and multiple pass welds for mild steel and low alloy steels.
APPLICATIONS :
- It is widely used for shipbuilding, storage vessels, structural fabrication, machinery and piping,etc.
NOTE ON USAGE :
- Use DC (+) polarity.
- Maintain a higher welding speed in order to get enough penetration in the down hand welding position.
TYPICAL CHEMICAL COMPOSITION OF WELD METAL (wt%) : (Shielding Gas: 100% CO2)
Weld Metal Analysis :
Phosphorus (P) 0.012Sulphur (S) 0.009
Carbon (C) 0.051 Manganese (Mn) 1.36 Silicon (Si) 0.48 Phosphorus (P) 0.012 Sulphur (S) 0.009 TYPICAL MECHANICAL PROPERTIES OF WELD METAL: (Shielding Gas: 100% CO2)
YP N/mm2 474 TS N/mm2 573 EL% 28 TYPICAL IMPACT VALUES :
- IV -20°C J
APPROVALS :
- ABS, BV, CCS,CE,CR, DNV, GL, LR, NK
SUGGESTED WELDING PARAMETERS (DC <+>)
Contact Us & Inquiries:
- 🌏 Website: https://thermal-mech.com
- 📩 FB Inbox: m.me/thermalmech
- ✅ LINE OA: @thermalmechanics
- 📧 Email: sales@thermal-mech.com
- ☎️ Tel: 02-759-4795
FAQ: Frequently Asked Questions About Gas-Shielded Flux Cored Wire for Mild Steel (E71T-1C)
Q: What makes Gas-Shielded Flux Cored Wire for Mild Steel (E71T-1C) ideal for general structural steel fabrication?
A: Gas-Shielded Flux Cored Wire for Mild Steel (E71T-1C) features an all-position titania slag system that allows welders to switch between flat, vertical, and overhead welds smoothly. It offers higher deposition rates and deeper penetration than standard solid MIG wire while maintaining low spatter levels.
Q: What shielding gas is recommended for this Wire Sorex E71T-1C product?
A: This Wire Sorex E71T-1C consumable is specifically formulated for use with 100% CO₂ shielding gas, offering optimal arc stability, deep joint penetration, and economical operation for heavy structural steelwork.
- Gallery
-
- Video
-
