Description
TIG Sorex/Argon Sorex/TIG Rod for Mild Steel Sorex
TIG Rod for Mild Steel Sorex | ER70S-6
Executing clean, high-integrity gas tungsten arc welding (GTAW / TIG) on carbon steel piping and structural fabrications demands high-purity filler metal. The TIG Rod for Mild Steel Sorex (AWS A5.18 ER70S-6) series from Thermatech delivers the arc stability and chemical purity required to satisfy stringent non-destructive testing (NDT) criteria. Formulated with high levels of silicon and manganese deoxidizers, Sorex mild steel TIG rods effectively suppress porosity and blowholes even when welding over mild surface oxides or mill scale.
Each Sorex TIG rod features a uniform copper coating to prevent rust during atmospheric exposure and to optimize electrical conductivity at the arc interface. With its smooth fluid puddle, low spatter characteristics, and flat, aesthetic bead profile, this filler metal is the industry standard for root pass welding in high-pressure steam pipes, oil and gas pipelines, structural tubing assemblies, and precision sheet metal fabrication.
Technical Advantages of Sorex Mild Steel TIG Rods
Engineered for professional fabricators and automated TIG operations, Sorex carbon steel filler wires offer distinct operational benefits:
- High Deoxidizer Content: High level of Silicon ($Si$) and Manganese ($Mn$) prevents gas entrapping and porosity, yielding dense, X-ray clear weld metal.
- Superior Arc Stability & Fluidity: Offers easy arc starting and fluid puddle control, enabling clean root passes and multi-run joints across all positions.
- Precision Stamping & Identification: Each rod is individually stamped with its AWS class at both ends for easy tracebility and quality assurance in code-compliant shops.
- Long Shelf Life Protection: Uniform copper plating guards against oxidation and rust buildup in humid workshop storage environments.
WELDING POSITION:
Weld Metal Analysis :
- Carbon (C) 0.090
- Carbon (C) 0.090
- Manganese (Mn) 1.440
- Silicon (Si) 0.880
- Phosphorus (P) 0.014
- Sulphur (S) 0.009
TYPICAL IMPACT VALUES :
IV -30°C J 105
APPROVALS :
ABS
| Size (mm.) | 1.2 | 1.6 | 2.0 | 2.4 | 3.2 | 4.0 |
| Lenght (mm.) | 100 | |||||
Contact Us & Inquiries:
- 🌏 Website: https://thermal-mech.com
- 📩 FB Inbox: m.me/thermalmech
- ✅ LINE OA: @thermalmechanics
- 📧 Email: sales@thermal-mech.com
- ☎️ Tel: 02-759-4795
FAQ: Frequently Asked Questions About TIG Rod for Mild Steel Sorex
Q: What shielding gas should be used with a TIG Rod for Mild Steel Sorex?
A: When using a TIG Rod for Mild Steel Sorex (ER70S-6), 100% Pure Argon (Ar) shielding gas is recommended to ensure a stable, clean tungsten arc and prevent oxidation of the weld pool.
Q: What is the main benefit of using an ER70S-6 grade Sorex TIG rod over ER70S-2 or ER70S-3?
A: ER70S-6 contains higher levels of silicon and manganese deoxidizers than ER70S-2 or ER70S-3. This provides superior puddle wetting, smoother bead edges, and higher tolerance to surface contaminants such as light rust, oil, or mill scale.
- Description
-
TIG Sorex/Argon Sorex/TIG Rod for Mild Steel Sorex
TIG Rod for Mild Steel Sorex | ER70S-6
Executing clean, high-integrity gas tungsten arc welding (GTAW / TIG) on carbon steel piping and structural fabrications demands high-purity filler metal. The TIG Rod for Mild Steel Sorex (AWS A5.18 ER70S-6) series from Thermatech delivers the arc stability and chemical purity required to satisfy stringent non-destructive testing (NDT) criteria. Formulated with high levels of silicon and manganese deoxidizers, Sorex mild steel TIG rods effectively suppress porosity and blowholes even when welding over mild surface oxides or mill scale.
Each Sorex TIG rod features a uniform copper coating to prevent rust during atmospheric exposure and to optimize electrical conductivity at the arc interface. With its smooth fluid puddle, low spatter characteristics, and flat, aesthetic bead profile, this filler metal is the industry standard for root pass welding in high-pressure steam pipes, oil and gas pipelines, structural tubing assemblies, and precision sheet metal fabrication.
Technical Advantages of Sorex Mild Steel TIG Rods
Engineered for professional fabricators and automated TIG operations, Sorex carbon steel filler wires offer distinct operational benefits:
- High Deoxidizer Content: High level of Silicon ($Si$) and Manganese ($Mn$) prevents gas entrapping and porosity, yielding dense, X-ray clear weld metal.
- Superior Arc Stability & Fluidity: Offers easy arc starting and fluid puddle control, enabling clean root passes and multi-run joints across all positions.
- Precision Stamping & Identification: Each rod is individually stamped with its AWS class at both ends for easy tracebility and quality assurance in code-compliant shops.
- Long Shelf Life Protection: Uniform copper plating guards against oxidation and rust buildup in humid workshop storage environments.
WELDING POSITION:
Weld Metal Analysis :
- Carbon (C) 0.090
- Carbon (C) 0.090
- Manganese (Mn) 1.440
- Silicon (Si) 0.880
- Phosphorus (P) 0.014
- Sulphur (S) 0.009
TYPICAL IMPACT VALUES :
IV -30°C J 105
APPROVALS :
ABSSize (mm.) 1.2 1.6 2.0 2.4 3.2 4.0 Lenght (mm.) 100 Contact Us & Inquiries:
- 🌏 Website: https://thermal-mech.com
- 📩 FB Inbox: m.me/thermalmech
- ✅ LINE OA: @thermalmechanics
- 📧 Email: sales@thermal-mech.com
- ☎️ Tel: 02-759-4795
FAQ: Frequently Asked Questions About TIG Rod for Mild Steel Sorex
Q: What shielding gas should be used with a TIG Rod for Mild Steel Sorex?
A: When using a TIG Rod for Mild Steel Sorex (ER70S-6), 100% Pure Argon (Ar) shielding gas is recommended to ensure a stable, clean tungsten arc and prevent oxidation of the weld pool.
Q: What is the main benefit of using an ER70S-6 grade Sorex TIG rod over ER70S-2 or ER70S-3?
A: ER70S-6 contains higher levels of silicon and manganese deoxidizers than ER70S-2 or ER70S-3. This provides superior puddle wetting, smoother bead edges, and higher tolerance to surface contaminants such as light rust, oil, or mill scale.
- Gallery
-
- Video
-
